Learning objective
Manufacture, repair, maintenance and disposal.
Read the explanation, check the common trap, then practise with flashcards and questions.
At a glance
0
Flashcards
0
Questions
Topic
Design for manufacturing, maintenance, repair and disposal
Subtopic
Design for manufacturing, maintenance, repair and disposal
Study support
Understand this objective
Quick explanation
Manufacture, repair, maintenance and disposal
- This point belongs to Design for manufacturing, maintenance, repair and disposal, especially Design for manufacturing, maintenance, repair and disposal.
- You need to be able to manufacture, repair, maintenance and disposal.
- Use the linked flashcards and practice questions to check recall, then practise applying the idea in an exam-style answer.
Why it matters
This objective helps connect Design for manufacturing, maintenance, repair and disposal to exam-style questions, flashcards, and revision notes for Design for manufacturing, maintenance, repair and disposal.
Quick student answer
Which of the following materials is most commonly used for injection molding in manufacturing?
Direct answer
Polyethylene is widely used for injection molding due to its excellent flow properties and ability to be molded into complex shapes.
Key terms
- Sustainability: The ability to maintain ecological balance by avoiding depletion of natural resources.
- Lifecycle Assessment: A systematic analysis of the environmental impact of a product throughout its entire lifecycle, from raw material extraction to disposal.
Common trap
Ignoring user feedback in design: Incorporate user testing and feedback at various stages of the design process to ensure the product is user-friendly and effective.
Related questions
Try this as a practice card
Question 1 of 3
Choose an answer, get feedback, then move sideways through the set.
Flashcard prompts
Flip through the key recall cards
Flashcard 1 of 3
Revision tools
Choose how to practise
Flashcards0 linked cards
Practice Questions0 linked questions
Related learning objectives
- Students should be aware of, and able to explain, the need to modify designs to make them more efficient to manufacture, including: • reducing the number of manufacturing processes • how the choice of materials affects the use, care and disposal of products: • labelling of materials to aid separation for recycling • making products easy to disassemble or separate • application of the six Rs of sustainability: • reduce the quantity of materials, of toxic materials, of damaging materials and associated energy use • reuse components and parts • rethink by using eco friendly alternative materials • recycle materials and/or components into new products • maintenance: • temporary and integral fixings • use of standardised parts • allowing for service and repair/ replacement of parts • ability to upgrade with software downloads.
Design for manufacturing, maintenance, repair and disposal
- Students should be aware of, and able to explain, the different ways in which a product can be designed to allow for more efficient manufacture, including: • ribs and webbing to reduce material thicknesses • snap fittings to remove the need for fixings/adhesives • internal moulded screw posts for use with self tapping screws • use of pre made components • use of standardised patterns and sizes • addition of texture in moulding to reduce number of manufacturing processes • self finishing. Disassembly.
Design for manufacturing, maintenance, repair and disposal
- Students should be aware of, and able to explain, how a product can be designed and manufactured with disassembly in mind, including integral fixings and active disassembly using smart materials such as SMA and biodegradable parts.
Design for manufacturing, maintenance, repair and disposal